Good Sam Club Open Roads Forum: Search
Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Posting Help and Support  |  Contact  

Open Roads Forum  >  Search the Forums

 > Your search for posts made by 'K_and_I' found 14 matches.

Sort by:    Search within results:
  Subject Author Date Posted Forum
RE: How to Clean Underbelly of TT After Removing Tape

I recently had to do some work that required cutting the coroplast. The dealer had done some taping before I took posession of the camper, and this is what he used: Tape It had held up well for 10 years, so I bought the same and used it. I cleaned the coroplast with rubbing alcohol and used a little heat from a heat gun. It sealed up well.
K_and_I 05/09/22 04:03pm Travel Trailers
RE: What % Of Alcohol Does Your State Have?

There may be something to the spiking mentioned above. I have a flex fuel truck, which has the ability to monitor alcohol content in fuel. I do occasionally check to see how much a tankful contains. I live in a E-10 state (E-85 is sold in separate pumps). The worst I've seen is 16.5% from a Sam's Club station, which gets their gas from Flying J/Pilot marked tanker trucks. From most other stations I read 9.8%. I did discuss this with a tanker truck driver, and he said it is possible that the last tankfull was E-85, and the driver didn't dump it all, refueled with E-10 and got a higher alcohol content.
K_and_I 04/20/22 08:55am General RVing Issues
RE: 3d printed water fill adaptor

Yes, the one on the right looks like the cap that screws on the filler.
K_and_I 02/26/22 12:17pm Do It Yourself Modifications and Upgrades (DIY)
RE: 3d printed water fill adaptor

I wish I knew correct terminology, it would make a response much easier. I tried the one 2112 showed above, but it wouldn't work on my fill hatch without modification. My camper uses a hatch that looks like this one: Clicky Taking material off of the portion labeled in red didn't help. I finally chalked the locking portion of the hatch on the camper and put the adapter against it. It appeared that the locking flange on the adapter was too close to the cap of the adapter (sorry again for poor terminology). I took a brass wire brush in a dremel and removed some of the inside of the locking flange, and was able to get it to go on. I can't test it yet as it is too cold here to be dealing with water and hoses, but I think it's going to work.
K_and_I 02/21/22 01:43pm Do It Yourself Modifications and Upgrades (DIY)
RE: 3d printed water fill adaptor

So, are you interested in printing one for me?;)
K_and_I 02/15/22 07:42pm Do It Yourself Modifications and Upgrades (DIY)
RE: 3d printed water fill adaptor

NICE FIND, I would change it to be a 90deg for the water hose. On the first page of this thread, a picture shows a 90 deg adapter being used, which is what I plan to use if I can get one of these made that actually works.
K_and_I 02/15/22 07:02am Do It Yourself Modifications and Upgrades (DIY)
RE: 3d printed water fill adaptor

He ended up printing a few and then remodeling the design. I forget why he said he was doing it. But here's the final product that he made and sent to me: width=400 width=400 His remodeled version has a bit of slop on each connection (camper side and hose fitting). We're talking about him tweaking it to fit a little tighter. But, thank you so much for the design/idea. This thing is great! Doug, As this thread was referenced in a new, recent thread, I thought I would bring it back from the dead to ask if you and your friend did tweak it for a better fit. I had the original design printed locally by the library, and it didn't fit at all. I don't know much about 3d printing, but it looked like the piece they made me didn't come off of a quality printer. I would like to have someone make one for me, but wanted to check to see if a newer design was available. Thanks
K_and_I 02/14/22 11:33am Do It Yourself Modifications and Upgrades (DIY)
RE: Things to see Places to stay South to North Indiana

Connor Prairie just north of Indy is worth a day. Connor Prairie
K_and_I 12/29/21 08:33am RV Parks, Campgrounds and Attractions
RE: Figuring Mileages

I find the Good Sam Trip Planner to be real helpful. It hasn't let me down yet. I also use Google Maps as a reference. Just a note for Good Sam Trip Planner- you really need to double check its route selection. I made a trip from Ohio to NC, and Trip Planner took me through the "Tail of the Dragon". I made the mistake of not double checking the route before taking off. I made it OK with my 26' trailer, but it's not a trip I want to make again.
K_and_I 11/17/21 08:47am Roads and Routes
RE: Garmin Basecamp Problems

There may be other good tutorials out there, but I went through this guy's youtube videos and found them helpful. If you have the time, start at the beginning (how to set things up) and progress through the rest. Garmin BaseCamp
K_and_I 11/06/21 07:36am Truck Campers
RE: From whom does Rockwood get their tank heaters

My 2011 Rockwood does have the Ultraheat tank heaters from the factory.
K_and_I 11/02/21 08:41am Tech Issues
RE: Use it or Lose it

Sometimes I think I'm some sort of freak. :B ...says the talking horse :B I am not quite as "seasoned" as you, but I realized a few years ago that I don't know any old people.
K_and_I 10/23/21 08:32am Around the Campfire
RE: Best route

First, let me state that I have not driven this route. I did check on Good Sam's Trip Planner to see what it recommends. It shows taking I-75 through Cincy to I-74 NW to I-275 NE to Rt. 27. Again, I don't know how good this route would be. You would think that Trip Planner knowing that we are in an rv (mine is set up for 10' 8" high travel trailer) would plan a good route. I did have one experience where Trip Planner took me through the Tail of the Dragon in TN on my way to NC. That was one to write home about ;) Hope you have a good trip.
K_and_I 10/12/21 07:26am Roads and Routes
RE: 2021 No Bo 19.5 bent axle

Both big rig trailer repair shops I mentioned did rubber torsion axle service of all sizes. Torsion axles have other parts that aren't rubber. However the OP didn't say the trailer was squatting more now. Jimnlin, would you mind naming the big rig trailer repair shops that will work on torsion axles? I'm a long way from OK, but might work a trip that way if they can work on mine. I have 1 wheel scrubbing a tire, and would like to get it fixed if I can. Thanks
K_and_I 10/07/21 05:16pm Travel Trailers
Sort by:    Search within results:

New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:

© 2022 CWI, Inc. © 2022 Good Sam Enterprises, LLC. All Rights Reserved.