Good Sam Club Open Roads Forum: Search
Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Posting Help and Support  |  Contact  



Open Roads Forum  >  Search the Forums

 > Your search for posts made by 'enblethen' found 1143 matches.

Sort by:    Search within results:
Page of 58  
Next
  Subject Author Date Posted Forum
RE: 2020 chevy trail boss

What engine and transmission?
enblethen 10/24/21 05:55pm Forum Posting Help and Support
RE: Help!

I would use a garden hose, stuck down through toilet. Crappy job!
enblethen 10/24/21 01:43pm Forum Posting Help and Support
RE: Help!

Solids can make a pyramid right below the toilet. You time using a hose and nozzle through the rig can knock it down. Use a piece of pipe with a tether cord to hold valve open. Tether is so it doesn't fall into the tank. Back flushing from discharge outlet works in some cases. Back flush device
enblethen 10/24/21 12:48pm Forum Posting Help and Support
RE: Help!

Not using enough water!
enblethen 10/24/21 11:58am Forum Posting Help and Support
RE: Atwood water heater problem

I installed a ground wire from the control board ground connection to the ground wire connection on the gas valve mounting bolt. I do not trust sheet metal screws for a good ground connection.
enblethen 10/24/21 11:56am Tech Issues
RE: Recent "improvements" to the web site.

I just tried an cannot log in. Edit I tried again, had to change password from the one I have used for many years
enblethen 10/24/21 08:24am Good Sam Club
RE: Atwood water heater problem

You can call Dinosaur and find who on your route stocks your board. Dinosaur electronics
enblethen 10/24/21 07:09am Tech Issues
RE: Atwood water heater problem

You can get Dinosaur electronics circuit boards from Amazon.
enblethen 10/23/21 08:37pm Tech Issues
RE: WINDSHIELDS ... for older Class As ? ......

Why would you go to an RV dealer for a windshield? Safelite has most windshields available. As rgatijnet1 said, they have specific numbers in the windshield. Many are common to more then one RV manufacturer.
enblethen 10/23/21 07:22am Class A Motorhomes
RE: Changing a tire yourself

I have changed a tire on the rod on our class A. I carry a breaker bar along with a cheater bar to break the lug nuts loose. I raised most of the weight off with hydraulic stabilizers, then did final lift with bottle jack. It was a rear inside dual. I would be very cautious about doing duals. I was left in a rural area by road service. They said service would be there next morning "if" they could find someone!
enblethen 10/22/21 08:14am Class C Motorhomes
RE: Coach battery bank not working

What is the exact model number of the converter? is it a 9100 or 9200? Does it supply power when connected to shore power?
enblethen 10/21/21 06:33am Tech Issues
RE: Coach battery bank not working

Look for a loose or dropped battery negative(ground) Verify polarity
enblethen 10/20/21 04:57pm Tech Issues
RE: Coach battery bank not working

Some newer converters have reverse polarity fuses on the 12 volt output terminal area. 12 volt distribution panel have a fuse in it from the converter on some. Verify 120 volt AC input to the converter. Check 120 volt AC circuit breakers.
enblethen 10/20/21 10:27am Tech Issues
RE: Atwood furnace needs new blower motor

Rechecking my book shows motor is 37698. ebay Amazon
enblethen 10/19/21 05:50pm Tech Issues
RE: Atwood furnace needs new blower motor

Ebay Here is another source, Several new ones on ebay.
enblethen 10/19/21 02:40pm Tech Issues
RE: Atwood furnace needs new blower motor

Amazon can be your friend. You didn't say what exact model is. Do you have the replacement motor number? I come up with a 32330
enblethen 10/19/21 02:21pm Tech Issues
RE: 1996 Damon Electric Question?

It may not be the switch. Could be loose connection on the battery disconnect relay, or the relay itself.
enblethen 10/19/21 02:19pm Class A Motorhomes
RE: 8531 /Burner Issue UPDATE--Photos ( Fixed!)

The white thing is the reset button. Yes, it is a ten amp.
enblethen 10/18/21 09:10pm Tech Issues
RE: 8531 /Burner Issue UPDATE--Photos ( Fixed!)

From earlier post: Battery voltage start- 12.59 Battery voltage furnace running- 12.50 Voltage at furnace CB- 11.34 Voltage at thing to the right-10.93 I would try to find from the Circuit breaker 11.34 to the Time delay relay 10.93 voltage drop.
enblethen 10/18/21 07:50pm Tech Issues
RE: 8531 /Burner Issue UPDATE--Photos ( Fixed!)

Did you find where you were loosing the nearly half of volt in the 12 volt portion?
enblethen 10/18/21 06:36pm Tech Issues
Sort by:    Search within results:
Page of 58  
Next


New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:




© 2021 CWI, Inc. © 2021 Good Sam Enterprises, LLC. All Rights Reserved.